Power Card Configurator

Edit timings and operator-facing messages. Generate the exact REPORTMAP.TXT used by the CG06 V2 RS-485 configuration uploader.

● Offline ready
Safety: This page only produces a text configuration file; it does not flash firmware or operate outputs. Keep customer-approved event codes and hardware routing fixed. Upload and test the file using the approved CG06 RS-485 service procedure. Never test live nitrogen release on an unqualified setup.
Current: approved V2 template
01 · Identity

Device information

Maximum 31 UTF-8 bytes.
Maximum 15 UTF-8 bytes. Replace the example before field use.
Minimum 2; increment after an approved change.
02 · Timers

Suppression sequence timings

Displayed in readable units; saved to firmware configuration as milliseconds.

DG shutdown → route selectionDO6/DO7 OFF, then DO4/DO5 route state.
Route selection → nitrogenDelay before the nitrogen DO3 step.
Post-release lockoutIgnore reset during this interval; afterward DI3 can reset.
03 · Event codes

Report messages

Edit the descriptions. Ports, states and codes are intentionally locked to the approved update sheet.

29 flash records
PortStateCodeDescription (editable)
04 · Save

Review & download

This is the plain-text file consumed by the V2 Linux RS-485 configuration tool.

Checking…

Download does not change the card. Keep a copy of the validated text file with the corresponding firmware revision and India bench logs.